Description

Dexter roof white insulation Dexter

White insulation is a type of completely waterproof coating based on polymers and acrylic materials. These materials are completely compatible with the environment and to use them, you can combine them with water and get the desired product.

Features of white roof insulation:
It is resistant to UV rays
Resistant to creating seams and cracks in different weather conditions
High durability of the product
Not absorbing dust and keeping the surface clean
Resistant to chemical and industrial substances and polluting particles in the air
Ability to travel in extreme cold and heat
Easy repair if damaged
Easy implementation
Excellent adhesion compared to Isogam and Qirguni to all types of vertical, horizontal and inclined surfaces
Consumption of white roof insulation:

The consumption of white insulation can be calculated depending on the porosity of the work surfaces and the unevenness. But normally, 700 grams to one kilogram of white insulating product per square meter is enough for one layer of coating.

The method of using white roof insulation:

White insulation is applied to the surface using a brush, roller or gun with a suitable nozzle. Immediately after that, the fiberglass mesh is stretched over the net surface. The use of net will increase the life, efficiency and elasticity of white insulation. After installing the net, the second layer of insulation is applied to increase the adhesion on the net. After the drying of the second layer, which (depending on the temperature and weather conditions) takes about 24 to 48 hours. Finally, the final layer is executed like the previous layers.

Uses of white roof insulation:
Ability to insulate all kinds of inclined and vertical surfaces
Ability to seal and insulate all kinds of water structures
Can be used on metal surfaces and roofs with excellent adhesion
Suitable for covering and insulating the dome of mosques
The best alternative to Isogam for roof insulation
Ability to perform on isogamated surfaces for local repair

Executive tips for white roof insulation:

Keep in mind that the most important issue in the implementation of white insulation is the cleanliness of the work surface. Make the work surface free of any dirt, grease and dust. If there are loose or tamped spots on the surface, remove them with the help of water pressure or sandblasting. If there are cremo or sunken spots on the surface under the work, it should be repaired with restorative mortar.

Technical specifications of white roof insulation:
Physical state: thick liquid
White color
Specific weight: 1.35 g/cm3
Drying time: 24 to 48 hours
You can see other products of Dexter Construction Chemical Industries here.