Description

porcelain tile glue and large dimensions | Dexter

Porcelain tile adhesive and large dimensions is a mixture of cement materials with polymer additives and adhesion enhancers and mineral fillers, which is ready to use by just adding water, for installing all types of porcelain tiles and large dimensions inside and outside the building, as well as It is applied tile by tile.

Features of porcelain tile adhesive and large dimensions:
Ability to run on vertical and horizontal surfaces
Excellent adhesive strength
Very high adhesion to the surface of old tiles
Ease of implementation

Uses of porcelain tile glue and large sizes:
Installing tiles on wall and floor tiles
Floor and wall tiling
Installation of porcelain tiles and large sizes on all types of surfaces
Installation of porcelain tiles and large dimensions inside the bathroom and toilets
Installation of porcelain tiles and large dimensions inside and outside the building

The consumption of porcelain tile glue and large dimensions:

Depending on the surface of the work and how the grooves are on the back of the tile, about 2.5 to 4 kg is needed to cover one square meter.

Implementation tips for porcelain tile glue and large dimensions:

The execution surface must be firm, clean, dry and free of dust and loose particles. Loose paint and coatings must be removed before applying glue. The surface of plaster walls (chipboard), light concrete and wall panels must be saturated with primer 3 hours before tiling.

The method of using porcelain tile glue and large dimensions:

۱. ۶ to 7 liters of water should be added to each 25 kg bag. Mixing the powder with water should be done using an electric mixer.

۲. Always add the powder to the water slowly and make sure that the electric mixer is turned on when the powder is added to the water and the mixing process continues until a uniform and homogeneous dough is obtained.

۳. Leave the prepared tile adhesive paste alone for 5 minutes. 4. Repeat the mixing process for a short time and then spread the resulting glue on the surface with a grooved spatula and place the antique stone on it with pressure.

۵. For better adhesion, move the antique stone slowly in place while pressing. Cover the paved surface after 24 hours.

Technical specifications of porcelain tile glue and large dimensions:
Specific weight: ± ۰.۰۵ ۱.۵ grams per cubic centimeter
Physical state: powder
Color: gray and white
Density of ready dough: 1.85 ± ۰.۰۵
Chlorine ion: No

You can see other products of Dexter Construction Chemical Industries here.