Description

powder tile adhesive | Dexter

Special powder tile adhesive is a mixture of cementitious materials with polymer additives and adhesive reinforcers and mineral fillers and can be used only by adding water. It is used to install all kinds of absorbent and non-absorbent materials on the floor and walls inside and outside the building on ceramic tiles.

Special powder tile adhesive is based on the following standards:
BS EN 12004
ISIRI 12492

Special powder tile adhesive is based on the following standards:
BS EN 12004
ISIRI 12492

Uses of special powder tile adhesive:
Install tile on tile
Wall and floor tiling
Installation of stone, ceramic and mosaic on a variety of surfaces
Installation of ceramic tiles inside the bathroom and toilet
Installation of stone, tiles and ceramics outside the building

Consumption of special powder tile adhesive:

Depending on the surface of the work and the grooves behind the tile, about 2.5 to 4 kg is required to cover one square meter.

Special tips for special powder tile adhesive:

The application surface must be firmly clean, dry and free of dust and loose particles. Loose paints and coatings should be removed before applying the adhesive.

The surface of gypsum walls – chipboard – lightweight concrete and wall panels should be saturated with primer 3 hours before tiling.

How to use special powder tile adhesive:
Each 25 kg bag should add 6 to 7 liters of water. Mixing the powder with water should be done using an electric mixer.
Always add the powder slowly to the water and make sure that the electric mixer is on when the powder is added to the water and that the mixing process continues until a uniform and homogeneous dough is obtained.
Leave the prepared tile adhesive paste for 5 minutes.
Repeat the mixing operation for a short time and then pull the resulting glue on the surface with a grooved spatula and press the tile on it.
For better adhesion, move the tile gently in place while squeezing. Seal the tiled surface after 24 hours.

Technical specifications of special powder tile adhesive:
Specific weight: 0.05 ± ۱.۵ g / cm3
Physical state: powder
Gray
Density of ready dough: 0/05 ± ۱/۸۵
Chlorine ion:no

You can see other products of Dexter Building Chemical Industries here.