Two-component sealing polymer adhesive AX400A – AX400B

It is a kind of two-component sealing and protective coating (powder and liquid) based on cement and acrylic resin. High flexibility, durability and very long life and adhesion to the following sections such as concrete, metal pipes and other materials. Properties of this material

Description

Two-component sealing polymer adhesive Dexter

It is a kind of two-component sealing and protective coating (powder and liquid) based on cement and acrylic resin. High flexibility, durability and very long life and adhesion to the following sections such as concrete, metal pipes and other materials. Properties of this material

The two-component sealing polymer adhesive is based on the following standards:
ASTM D412
ASTM D624
ASTM D1149
ASTM D5963
ASTM G154
AST

 

Features of two-component sealing polymer adhesive:
Protects surfaces against carbonation and chlorine ion penetration
Sealing and impermeability of concrete surfaces
Good chemical resistance to gasoline and chlorides
Very high elasticity
Excellent strength against alkaline and mild inorganic acid solutions
Do not prevent the concrete from breathing
Extremely strong adhesion to subfloor surfaces
Speed ​​and ease of execution
Non-toxic and non-flammable

Uses of two-component sealing polymer adhesive:
Fix leakage of executive seams
Eliminates moisture and permeability of all concrete structures
Protection and waterproofing of all concrete structures such as tunnels, water transfer piers, water and sewage treatment plants for drinking water tanks, septic tanks and fish ponds

Consumption rate of two-component sealing polymer adhesive:

Depending on the porosity and permeability, it consumes about 1200 li 1600 grams per square meter.

How to mix two-component sealing polymer adhesive:

First pour component (B) into the container in which you mix the product, then add component (A) slowly while the mixer is on. Continue mixing until the mixture is homogeneous and uniform.

How to use two-component sealing polymer adhesive:
Concrete surfaces must be thoroughly cleaned and free of any loose particles, dirt, dust, paint and other coatings before application.
It is best to do this using sandblasting or electric wire brushes.
Wet all surfaces on which the sealing material will be applied using water.
After preparing the surfaces in the above method, run the product on the surface with a brush or pistol with a suitable nozzle.

Technical specifications of two-component sealing polymer adhesive:
Physical state: component (A) is powder and component (B) is liquid.
Color: component (A) is gray (available in different colors depending on customer needs) and component (B) is white.
Component density (A): 1/05 ± ۰.۰۲
Component acidity (B): 7 to 9
Surface drying time 2 to 3 hours
Final drying time: 3 to 7 days
Usage time at 30 ° C is about 40 minutes
It does not have chlorine ions.
You can see other products of Dexter Building Chemical Industries here.